Monday, 5 June 2017

300-180 DCIT Troubleshooting Cisco Data Center Infrastructure

300-180 DCIT
Troubleshooting Cisco Data Center Infrastructure
Exam Number 300-180 DCIT
Associated Certifications CCNP Data Center
Duration 90 minutes (60-70 questions)
Available Languages English
Register Pearson VUE
This exam tests a candidate’s knowledge of data center infrastructure design pertaining to deployment requirements and options for network connectivity, infrastructure, storage network, compute connectivity, and compute resource parameters.
Exam Description
The Troubleshooting Cisco Data Center Infrastructure (DCIT) exam (300-180) is a 90-minute, 60–70 question assessment. This exam is one of the exams associated with the CCNP Data Center Certification. This exam tests a candidate’s knowledge of troubleshooting Cisco data center infrastructure including data network protocols, network virtualization and automation, Application Centric Infrastructure (ACI), storage, compute platforms, and management and operations. The course, Troubleshooting Cisco Data Center Infrastructure v6 (DCIT), helps candidates to prepare for this exam because the content is aligned with the exam topics.
The following topics are general guidelines for the content likely to be included on the exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.
1.0 Troubleshooting Data Network Protocols 26%

1.1 Troubleshoot data center protocols
1.1.a VPC
1.1.b Fabric path
1.1.b [i] Segment ID
1.1.b [ii] Distributed gateway, anycast HSRP
1.1.b [iii] MBGP
1.1.b [iv] vPC+
1.1.c VXLAN
1.1.c [i] Distributed gateway
1.1.c [ii] MBGP EVPN
1.1.c [iii] VPC
1.1.d OTV
1.1.e LISP
1.2 Troubleshoot routing protocols
1.2.a OSPFv2, OSPFv3
1.2.b IS-IS
1.2.c PIM
1.2.d FHRP
1.2.d [i] HSRP
1.2.d [ii] VRRP
1.3 Troubleshoot switching protocols
1.3.a STP
1.3.b LACP/port channel
1.3.c FEX, VNTAG
2.0 Troubleshooting Network Virtualization and Automation 13%

2.1 Troubleshoot logical device separation
2.1.a VDC
2.1.b VRF
2.2 Troubleshoot virtual switching technologies
2.3 Troubleshoot configuration profiles
2.3.a Auto-config
2.3.b Port profiles
2.3.c Configuration synchronization
3.0 Troubleshooting Application Centric Infrastructure 13%

3.1 Troubleshoot fabric discovery process
3.2 Troubleshoot VMM domain integration
3.3 Troubleshoot tenant-based policies
3.3.a EPGs
3.3.a [i] Pathing
3.3.a [ii] Domains
3.3.b Contracts
3.3.b [i] Consumer
3.3.b [ii] Providers
3.3.b [iii] Inter-tenant
3.3.c Private networks
3.3.c [i] Enforced/unenforced
3.3.d Bridge domains
3.3.d [i] Unknown unicast settings
3.3.d [ii] ARP settings
3.3.d [iii] Unicast routing
3.4 Troubleshoot external network integration
3.4.a External bridge network
3.4.b External routed network
3.5 Troubleshoot packet flow
3.5.a Unicast
3.5.b Multicast
3.5.c Broadcast
3.5.d Endpoint database
3.6 Troubleshoot security domains and role mapping
3.6.a AAA
3.6.b RBAC
4.0 Troubleshooting Data Center Storage 17%

4.1 Troubleshoot Fibre Channel
4.1.a Switched fabric initialization
4.1.b Fibre Channel buffer credit starvation
4.1.c FCID
4.2 Troubleshoot Fibre Channel protocol services
4.2.a Zoning
4.2.b FCNS
4.2.c VSAN
4.2.d FSPF
4.3 Troubleshoot FCoE
4.3.a Storage VDC
4.3.b FIP
4.3.c FCoE topologies
4.3.d DCB
4.4 Troubleshoot boot from SAN
4.4.a FCoE / Fibre Channel
4.4.b iSCSI
4.4.c Multipath
4.5 Troubleshoot FCoE/FC interface parameters
4.5.a Dedicated and shared mode
4.5.b Port types
4.5.c Port channels, ISL
4.6 Troubleshoot SAN technologies
4.6.a Fabric redundancy
4.6.b NPV, NPIV, FCF
5.0 Troubleshooting Data Center Compute Platforms 21%

5.1 Troubleshoot Cisco computing platforms
5.1.a Stand-alone computing
5.1.b Chassis/blade
5.1.c Modular / server cartridges
5.1.d Server integration
5.2 Troubleshoot hardware interoperability
5.2.a Converged Network Adapters / port expanders
5.2.b Firmware
5.2.c I/O modules / FEX
5.2.d Fabric interconnects
5.3 Troubleshoot packet flow from server to the fabric
5.4 Troubleshoot server abstraction technologies
5.4.a Service profiles
5.4.a [i] Pools
5.4.a [ii] Policies
5.4.a [ii] 1 Connectivity
5.4.a [ii] 2 Placement policy
5.4.a [ii] 3 Remote boot policies
6.0 Troubleshooting Data Center Management and Operations 10%

6.1 Troubleshoot firmware upgrades, packages, and interoperability
6.2 Troubleshoot integration of centralized management
6.3 Troubleshooting data center LAN and SAN security
6.3.a Troubleshoot fabric binding and port security
6.3.b Troubleshoot AAA and RBAC
6.3.c Troubleshoot first-hop security
6.3.c [i] Dynamic ARP inspections
6.3.c [ii] DHCP snooping
6.3.c [iii] Unicast RPF
6.3.c [iv] MACsec
6.3.c [v] Port security
6.3.d Troubleshoot CoPP
6.3.e Troubleshoot ACLs
6.4 Troubleshoot data center compute security
6.4.a Troubleshoot AAA and RBAC
6.4.b Troubleshoot key management
QUESTION 1 – (Topic 1)
You have a Cisco UCS Fabric Interconnect in Fibre Channel end-host mode.
You must check whether all of the Fibre Channel targets are available through the
fabric interconnect at VSAN 200. Which command must you use?
A. show npvflogi-table
B. show flogi-table
C. show flogi database
D. show zoneset active VSAN 200
Answer: A
QUESTION 2 – (Topic 1)
A customer is troubleshooting QoS in a Cisco UCS domain due to high packet drops in the network.
The customer has configured the vNIC and associated QoS policy, and changed the MTU from 1000 to 1200. Packet drops still exist. What is the cause of this issue?
A. The MTU specified here must be greater than the MTU specified in the associated QoS system class.
If this MTU value is less than the MTU value in the QoS system class, packets may be dropped during data transmission.
B. The MTU specified here must be equal to or less than the MTU specified in the associated QoS system class.
If this MTU value exceeds the MTU value in the QoS system class, packets may be dropped during data transmission.
C. The MTU specified here must be less than the MTU specified in the associated QoS system policy.
If this MTU value exceeds the MTU value in the QoS system policy, packets may be not be dropped during data transmission.
D. The MTU must be optimized and should be changed to fc with the CLI command set mtu fc.
Answer: B
QUESTION 3 – (Topic 1)
When a service profile is disassociated from a server, what happens to the identity and
connectivity information for the server?
A. It is cleared and set to the default that was setup initially by the first configuration.
B. It is maintained and can be reused.
C. It is reset to factory defaults.
D. It uses master service profile parameters.
E. It takes parameters of other servers in the service profile.
Answer: C
QUESTION 4 – (Topic 1)
What should you do when you see faults during the initial setup and discovery process?
A. Take note and address the faults.
B. You can safely ignore these faults.
C. Log them and try to address the first one.
D. Reboot until the error messages go away.
Answer: B
QUESTION 5 – (Topic 1)
How long are the LED states saved after a blade is removed from a Cisco UCS chassis?
A. 1 minute
B. 5 minutes
C. 10 minutes
D. 30 minutes
E. 60 minutes
Answer: C
Posted by at
Labels: , , , , , , ,

1 comment:

Subscribe to: Post Comments (Atom)