Thursday 14 April 2016

Exam 70-410 Installing and Configuring Windows Server 2012

Published: September 17, 2012
Languages: English, Chinese (Simplified), French, German, Japanese, Portuguese (Brazil)
Audiences: IT professionals
Technology: Windows Server 2012
Credit toward certification: MCP, MCSA, MCS

Skills measured
This exam measures your ability to accomplish the technical tasks listed below. The percentages indicate the relative weight of each major topic area on the exam. The higher the percentage, the more questions you are likely to see on that content area on the exam. View video tutorials about the variety of question types on Microsoft exams.

Please note that the questions may test on, but will not be limited to, the topics described in the bulleted text.

Do you have feedback about the relevance of the skills measured on this exam? Please send Microsoft your comments. All feedback will be reviewed and incorporated as appropriate while still maintaining the validity and reliability of the certification process. Note that Microsoft will not respond directly to your feedback. We appreciate your input in ensuring the quality of the Microsoft Certification program.

If you have concerns about specific questions on this exam, please submit an exam challenge.

If you have other questions or feedback about Microsoft Certification exams or about the certification program, registration, or promotions, please contact your Regional Service Center.

As of January 2014, this exam includes content covering Windows Server 2012 R2.

Install and configure servers (15–20%)
Install servers
Plan for a server installation, plan for server roles, plan for a server upgrade, install Server Core, optimize resource utilization by using Features on Demand, migrate roles from previous versions of Windows Server
Configure servers
Configure Server Core, delegate administration, add and remove features in offline images, deploy roles on remote servers, convert Server Core to/from full GUI, configure services, configure NIC teaming, install and configure Windows PowerShell Desired State Configuration (DSC)
Configure local storage
Design storage spaces, configure basic and dynamic disks, configure master boot record (MBR) and GUID partition table (GPT) disks, manage volumes, create and mount virtual hard disks (VHDs), configure storage pools and disk pools, create storage pools by using disk enclosures

Preparation resources
Plan for server roles
Configure Server Core
Windows Server 2012 "early experts" challenge – Exam 70-410 – storage spaces

Configure server roles and features (15–20%)
Configure file and share access
Create and configure shares, configure share permissions, configure offline files, configure NTFS permissions, configure access-based enumeration (ABE), configure Volume Shadow Copy Service (VSS), configure NTFS quotas, create and configure Work Folders
Configure print and document services
Configure the Easy Print print driver, configure Enterprise Print Management, configure drivers, configure printer pooling, configure print priorities, configure printer permissions
Configure servers for remote management
Configure WinRM, configure down-level server management, configure servers for day-to-day management tasks, configure multi-server management, configure Server Core, configure Windows Firewall, manage non-domain joined servers

Preparation resources
Improve file server resiliency with ReFS in Windows Server 2012
Simplified printing with Windows 8 and Windows Server 2012
Using the Windows Server 2012 Server Manager for remote and multi-server management

Configure Hyper-V (15–20%)
Create and configure virtual machine settings
Configure dynamic memory, configure smart paging, configure Resource Metering, configure guest integration services, create and configure Generation 1 and 2 virtual machines, configure and use enhanced session mode, configure RemoteFX
Create and configure virtual machine storage
Create VHDs and VHDX, configure differencing drives, modify VHDs, configure pass-through disks, manage checkpoints, implement a virtual Fibre Channel adapter, configure storage Quality of Service
Create and configure virtual networks
Configure Hyper-V virtual switches, optimize network performance, configure MAC addresses; configure network isolation, configure synthetic and legacy virtual network adapters, configure NIC teaming in virtual machines

Preparation resources
Hyper-V dynamic memory overview
Configuring virtual disks and storage
Hyper-V network virtualization overview

Deploy and configure core network services (15–20%)
Configure IPv4 and IPv6 addressing
Configure IP address options, configure IPv4 or IPv6 subnetting, configure supernetting, configure interoperability between IPv4 and IPv6, configure Intra-site Automatic Tunnel Addressing Protocol (ISATAP), configure Teredo
Deploy and configure Dynamic Host Configuration Protocol (DHCP) service
Create and configure scopes, configure a DHCP reservation, configure DHCP options, configure client and server for PXE boot, configure DHCP relay agent, authorize DHCP server
Deploy and configure DNS service
Configure Active Directory integration of primary zones, configure forwarders, configure Root Hints, manage DNS cache, create A and PTR resource records

Preparation resources
IPv6 bootcamp: Get up to speed quickly
What is DHCP?

Install and administer Active Directory (15–20%)
Install domain controllers
Add or remove a domain controller from a domain, upgrade a domain controller, install Active Directory Domain Services (AD DS) on a Server Core installation, install a domain controller from Install from Media (IFM), resolve DNS SRV record registration issues, configure a global catalog server, deploy Active Directory infrastructure as a service (IaaS) in Microsoft Azure
Create and manage Active Directory users and computers
Automate the creation of Active Directory accounts; create, copy, configure, and delete users and computers; configure templates; perform bulk Active Directory operations; configure user rights; offline domain join; manage inactive and disabled accounts
Create and manage Active Directory groups and organizational units (OUs)
Configure group nesting; convert groups, including security, distribution, universal, domain local, and domain global; manage group membership using Group Policy; enumerate group membership; delegate the creation and management of Active Directory objects; manage default Active Directory containers; create, copy, configure, and delete groups and OUs

Preparation resources
What's new in Active Directory Domain Services (ADDS) installation
Virtualization-safe technology and domain controller cloning
Overview of Active Directory simplified administration

Create and manage Group Policy (15–20%)
Create Group Policy objects (GPOs)
Configure a Central Store, manage starter GPOs, configure GPO links, configure multiple local Group Policies
Configure security policies
Configure User Rights Assignment, configure Security Options settings. configure Security templates, configure Audit Policy, configure Local Users and Groups, configure User Account Control (UAC)
Configure application restriction policies
Configure rule enforcement, configure AppLocker rules, configure Software Restriction Policies
Configure Windows Firewall
Configure rules for multiple profiles using Group Policy; configure connection security rules; configure Windows Firewall to allow or deny applications, scopes, ports, and users; configure authenticated firewall exceptions; import and export settings

Preparation resources
What’s new in Group Policy in Windows Server 2012
Group Policy analysis and troubleshooting
Group Policy setting reference for Windows 8 and Windows Server 2012

QUESTION 1
Your company has a main office and two branch offices. The offices connect to each other by using a WAN link.
In the main office, you have a server named Server1 that runs Windows Server 2012 R2.
Server1 is configured to use an IPv4 address only.
You need to assign an IPv6 address to Server1. The IP address must be private and routable.
Which IPv6 address should you assign to Server1?
A. fe80:ab32:145c::32cc:401b
B. ff00:3fff:65df:145c:dca8::82a4
C. 2001:ab32:145c::32cc:401b
D. fd00:ab32:14:ad88:ac:58:abc2:4

Answer: D

Explanation:
Unique local addresses are IPv6 addresses that are private to an organization in the same way that private addresses–such as 10.x.x.x, 192.168.x.x, or 172.16.0.0 172.31.255.255–can be used on an IPv4 network.
Unique local addresses, therefore, are not routable on the IPv6 Internet in the same way that an address like 10.20.100.55 is not routable on the IPv4 Internet. A unique local address is always structured as follows:
The first 8 bits are always 11111101 in binary format. This means that a unique local address always begins with FD and has a prefix identifier of FD00::/8.


QUESTION 2
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2 and has the
Hyper-V server role installed.
On Server1, you create and start a virtual machine named VM1. VM1 is configured as shown in the following table.


You need to recommend a solution to minimize the amount of disk space used for the checkpoint of VM1.
What should you do before you create the checkpoint?
A. Run the Resize-VHD cmdlet.
B. Convert Disk1.vhd to a dynamically expanding disk.
C. Shut down VM1.
D. Run the Convert-VHD cmdlet.

Answer: C

Explanation:
Changing between a fixed and dynamic disk type does not alter the size of a SNAPSHOT much at all.
However, since a snapshot is a record of a VMs state at the exact time that the snapshot was taken, shutting down the VM before taking the snapshot prevents the snapshot from having to contain all of the data in RAM (as there is no data in memory when a machine is powered down).
The question states that the solution should minimize the amount of disk space used for the checkpoint of VM1. If the checkpoint is taken while VM1 is running, there will be two attritional files present at the checkpoint location; a .VSV with VM1 saved state files and a
.BIN file which contains VM1’s memory contents. If, however, VM1 is shut down first, these files will not be created, thus saving disk space.
In order to convert Disk1.vhd to a dynamically expanding disk, VM1 still have to be shut down.


QUESTION 3
Your network contains an Active Directory forest named contoso.com.
The forest contains two domains named contoso.com and child.contoso.com and two sites named Site1 and Site2. The domains and the sites are configured as shown in following table.


When the link between Site1 and Site2 fails, users fail to log on to Site2.
You need to identify what prevents the users in Site2 from logging on to the child.contoso.com domain.
What should you identify?
A. The placement of the global catalog server
B. The placement of the infrastructure master
C. The placement of the domain naming master
D. The placement of the PDC emulator

Answer: D

Explanation:
The exhibit shows that Site2 does not have a PDC emulator. This is important because of the close interaction between the RID operations master role and the PDC emulator role.
The PDC emulator processes password changes from earlier-version clients and other domain controllers on a best-effort basis; handles password authentication requests involving passwords that have recently changed and not yet been replicated throughout the domain; and, by default, synchronizes time. If this domain controller cannot connect to the PDC emulator, this domain controller cannot process authentication requests, it may not be able to synchronize time, and password updates cannot be replicated to it.
The PDC emulator master processes password changes from client computers and replicates these updates to all domain controllers throughout the domain. At any time, there can be only one domain controller acting as the PDC emulator master in each domain in the forest.


QUESTION 4 HOTSPOT
Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2.
All servers are configured to enforce AppLocker policies.
You install a server named Server1.
On Server1, you install an application named App1.exe in a folder located on C:\App1.
You have two domain groups named Group1 and Group2.A user named User1 is a member of Group1 and Group2.
You create a Group Policy object (GPO) named GPO1. You link GPO1 to contoso.com.
You create the executable rules as shown in the exhibit by using the Create Executable Rules wizard. (Click the Exhibit button.)


To answer, complete each statement according to the information presented in the exhibit. Each correct selection is worth one point.



Answer:



QUESTION 5
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.


You need to ensure that VM1 can use more CPU time than the other virtual machines when the CPUs on Server1 are under a heavy load.
What should you configure?
A. NUMA topology
B. Resource control
C. resource metering
D. virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization

Answer: B

Explanation:
B. Resource controls provide you with several ways to control the way that Hyper-V allocates resources to virtual machine. Resource control in used in the event where you need to adjust the computing resources of a virtual machine, you can reconfigure the resources to meet the changing needs. You can also specify resource controls to automate how resources are allocated to virtual machines.
References: http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx http://technet.microsoft.com/en-us/library/hh831410.aspx http://technet.microsoft.com/en-us/library/cc742470.aspx
Exam Ref 70-410, Installing and Configuring Windows Server 2012 R2, Chapter 3: Configure Hyper-V, Objective 3.1: Create and Configure virtual machine settings, p.144 Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 7: Hyper-V Virtualization, Lesson 2: Deploying and configuring virtual machines, p.335


QUESTION 6
Your network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1 that runs Windows Server 2012 R2.
You create a DHCP scope named Scope1. The scope has a start address of 192.168.1.10, an end address of 192.168.1.50, and a subnet mask of 255.255.255.192.
You need to ensure that Scope1 has a subnet mask of 255.255.255.0.
What should you do first?
A. From the DHCP console, reconcile Scope1.
B. From the DHCP console, delete Scope1.
C. From the DHCP console, modify the Scope Options of Scope1.
D. From Windows PowerShell, run the Set-DhcpServerv4Scope cmdlet.

Answer: B

Explanation:
You cannot change the subnet mask of a DHCP scope without deleting the scope and recreating it with the new subnet mask.
Set-DhcpServerv4Scope does not include a parameter for the subnet mask.


QUESTION 7
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 has the Group Policy Management feature installed. Server2 has the Print and Document Services server role installed.
On Server2, you open Print Management and you deploy a printer named Printer1 by using a Group Policy object (GPO) named GPO1.When you open GPO1 on Server1, you discover that the Deployed Printers node does not appear.
You need to view the Deployed Printers node in GPO1.
What should you do?
A. On Server1, modify the Group Policy filtering options of GPO1.
B. On a domain controller, create a Group Policy central store.
C. On Server2, install the Group Policy Management feature.
D. On Server1, configure the security filtering of GPO1.

Answer: C

Explanation:
Pre-Requisites
To use Group Policy for printer deployment you will need to have a Windows Active Directory domain, and this article assumes that your Domain Controller is a Windows 2008 R2 Server. You will also need the Print Services role installed on a server (can be on your DC), and you will be using the Print Management and Group Policy Management consoles to configure the various settings. It’s assumed that you have already followed Part One and have one or more printers shared on your server with the necessary drivers, ready to deploy to your client computers.


No comments:

Post a Comment